Dragino Long Range Transceiver LoRa Shield US915

$20.71
(VAT excluded)
In stock
Commercially available
This product is already in mass production. Production batches are in route or stock is available. All certifications for the regional areas where the products are sold are obtained from competent institutions.
  • Buy 10 for $18.72 each and save 10%
  • Buy 20 for $17.55 each and save 15%
Dragino Technology CO. Ltd
Contact the seller
  • device

Key features highlights :

Features:

  • Compatible with 3.3v or 5v I/O Arduino Board.
  • Frequency Band: 915MHz/868 MHZ/433 MHZ (Pre-configure in factory)
  • Low power consumption
  • Compatible with Arduino Leonardo, Uno, Mega, DUE
  • External Antenna via I-Pex connector

Summary

  • 168 dB maximum link budget.
  • +20 dBm - 100 mW constant RF output vs.
  • +14 dBm high efficiency PA.
  • Programmable bit rate up to 300 kbps.
  • High sensitivity: down to -148 dBm.
  • Bullet-proof front end: IIP3 = -12.5 dBm.
  • Excellent blocking immunity.
  • Low RX current of 10.3 mA, 200 nA register retention.
  • Fully integrated synthesizer with a resolution of 61 Hz.
  • FSK, GFSK, MSK, GMSK, LoRaTM and OOK modulation.
  • Built-in bit synchronizer for clock recovery.
  • Preamble detection.
  • 127 dB Dynamic Range RSSI.
  • Automatic RF Sense and CAD with ultra-fast AFC.
  • Packet engine up to 256 bytes with CRC.
  • Built-in temperature sensor and low battery indicator.

Description :

The Dragino LoRa Shield is a long range transceiver on a Arduino shield form factor and based on Open source library. The Lora Shield allows the user to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimising current consumption.

The LoRa Shield based on RFM95W/RFM98W targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, smartphone detection, building automation, and so on.

Using Hope RF’s patented LoRaTM modulation technique the Lora Shield can achieve a sensitivity of over -148dBm using a low cost crystal and bill of materials. The high sensitivity combined with the integrated +20 dBm power amplifier yields industry leading link budget making it optimal for any application requiring long range or robustness. The LoRa Shield also provides significant advantages in both blocking and selectivity over conventional modulation techniques, solving the traditional design compromise between range, interference immunity and energy consumption.

These devices also support high performance (G)FSK modes for systems including WMBus, IEEE802.15.4g. The Lora Shield deliver exceptional phase noise, selectivity, receiver linearity and IIP3 for significantly lower current consumption than other competing devices.

Specifications :
Seller Dragino Technology CO. Ltd
Manufacturer Part number LoRa Shield US915
Product Attributes Dev kit, Field test, Modules
RF Region US915 - US 902-928MHz
LoRa Class Class A
Solution Represented Smart Cities, Smart Industries, Smart Building
RF power (dBm) 20 dBm
Battery type 12V input
Output throughput (mW) 100
Antenna External on connector
RF transceiver SX1276, SX1278
Interfaces Ethernet
Depth (cm) 6.3
Width (cm) 4.3
Height (cm) 2.3
Technical docs
Certification RoHS
Lead-time if backordered (in working days) 30
Is available for sale Yes
Lead-time if in Stock (in working days) 2
Specific commercial conditions

Shipping Notice

Prices are exclusive of local taxes and import duties.

Share your thoughts for: Dragino Long Range Transceiver LoRa Shield US915
Write a customer review

No questions asked yet.

Vendor Questions/Answers:
Ask your question
Only registered users can ask questions. Please Sign in or create an account