(VAT excluded)
Out of stock
Available on: 06-09-2019
Commercially available
This product is already in mass production. Production batches are in route or stock is available. All certifications for the regional areas where the products are sold are obtained from competent institutions.

Key features highlights :

Smart Waste Management

Smart Fluids Management

Smart Industries

Energy saving

Filling level :

Short distance/high accuracy 2,5 CM - 120 CM

Long distance/standard accuracy 4 CM - 200 CM

Operating temperature range -20° to +70°

Remotly send commands

LoRawan Protocol

Patented technology

Description :

This SBA Filling Level sensor is ideally suited for a wide range of applications such as Smart City or Smart Industries and will help you to make sensitives money savings.

It measures and transmits 6 parameters by default: 

  • The container filling level
  • The temperature
  • The moisture content
  • The ambiant light level
  • The open / closed lid or standing / lying container detection
  • The voltage level of the power storage unit

Actually the main use case is the Smart Waste Management: no more overflowing bins or waste of time during the collection by emptying almost empty trash bins.

But it also can be used for inventory level monitoring, fluids level (water,stream,mud,...), agricultural containers or any use cases where you need to be aware of the filling rate.

The main idea behind purchasing our industrialized sensor is to allow you to test your use cases, and when you have a good feedback and results, we can customize your solution or device if needed for high volume orders.

It is possible to remotely send commands and we can also propose you to use our web platform which greatly simplifies data analysis.

Even after the installation of the sensor, you will be able to interact with it by remotely sending commands such as changing the maximum height of the container, so the sensor won't need to be calibrated again if you change your container

Another smart command is changing the frequency of data transmission: indeed, after a while if your feedback shows that you need to receive data more often, it will be possible to increase the frequency or otherwise reduce it and improve the battery life.

Concerned by the energy saving, we are committed in a logic of optimization of energy: thanks to a patented technology, this sensor was made to improve the life of the battery by for example automatically adjusts the frequencies according to the filling level.

CALCULATION OF AUTONOMY on the basis of an average annual temperature of 11,2 ° C, a battery of 3.7V and a capacity of 2.7Ah, the sensor will have an autonomy of 10 years for a measurement + transmission every 2 hours.

Our sensor has all the features to make it easy to use: a certified LoRa Module, a compact size, a low energy consumption and power management strategy.

LoRawan Secure Element (SE) in option after the 15th of december 2018.

Certified compliance with French IoT operators networks:

  • Orange
  • Actility

Checks under the responsibility of the buyer:

  • LoRa Cover
  • Sensor will not be completely enclosed in a metal container
  • The sensor visibility (vandalism)
  • Frequency compatibility with the area of use (868 mHZ in EU)
  • His ability to collect and process data
  • Compatibility with the height measured by the sensor.
Specifications :
Seller GST (GreenSysTech)
Manufacturer name GST
SKU 269-4084
Manufacturer Part number SBA PRM-OPT-B-2M
Product Attributes Metering
RF Region EU868 - Europe 863-870MHz
LoRa Class Class A
Solution Represented Smart Agriculture, Smart Cities, Smart Industries, Facilities Management, Other, Smart Metering
Power supply Non rechargeable battery
Battery specification (Wh) 9,36
Battery type Lithium ion
Output throughput (mW) 25
Antenna Integrated
RF transceiver SX1276
Interfaces I2C
Other interfaces SPI, UART
Operating Temperature (min to max) -20°C to +70°C
Depth (cm) 3
Width (cm) 7,7
Height (cm) 5
Certification CE, RoHS
Lead-time if backordered (in working days) 35
Is available for sale Yes
Lead-time if in Stock (in working days) 30
Specific commercial conditions

Considering that each use case are different and the large choice of versions of our sensors, we have put in place a questionnaire to allow the customer to ensure that the product he wants to order fits his needs.

We do not accept any liability for an order error without first sending the questionnaire to GST.

Write a customer review

No questions asked yet.

Vendor Questions/Answers:
Ask your question
Only registered users can ask questions. Please Sign in or create an account