INEO-SENSE - ESG-Logger-NRJ - Energy logger with 3 Rogosky probes 300A - EU868/US915 - IP55

ESG-Logger is a battery-powered device dedicated to industrial and environmental measurement. It offers a panel of sensors allowing precise sensing and making compensation measurement taking into account environmental temperature and pressure. Designed to be place in hostile conditions, this device will acquire relevant and accurate data linked to your industrial processes.

 

$521.72
(VAT excluded)
In stock
Usually delivered in 5 working days
Production ready
Product design is finalized. Bill of Materials is finalized. An initial important batch of products to make the SKU commercially available is required, meaning no inventories are currently available and lead time is in months. All final certifications are not obtained yet but pre-testing has been operated and seller is 100% sure to obtain them. Datasheet and user guide should already be available.
  • Buy 10 for $456.51 each and save 12%
  • Buy 100 for $397.87 each and save 24%
  • Buy 500 for $362.60 each and save 30%

Key features highlights :

Main features

  • Detachment detection
  • Open Case alarm
  • 2 Replaceable batteries
  • Main powered in option
  • 1 bicolor LED
  • Threshold alarm transmission
  • Scheduled sensor reading
  • 2 IP66 grommets for external probe wiring
  • Scheduled spontaneous transmission time
  • Both Clover-Net and LoRaWAN communications
  • Datalogging mode
    15,000 to 60,000 timestamped measurements

 

Description :

ESG-Logger is a battery-powered device dedicated to industrial and environmental measurement. It offers a panel of sensors allowing precise sensing and making compensation measurement taking into account environmental temperature and pressure. Designed to be place in hostile conditions, this device will acquire relevant and accurate data linked to your industrial processes.

 

Plug-and-Play

Automated network discovery and presence messages allow ESG-Logger to be easily installed wherever sensor monitoring is required. Natively capable of communicating in private Clover-Net RF and public LoRaWAN networks, the device is able to enlarge its working area.     
Several features ease the commissioning and allow advanced management functionalities without requiring specific tools, like a push button,  a bicolor LED indicating the device status locally, or even configuration through NFC.
An attached sensor and open case detection advise  from any tamper tentative.

Basic inputs, but customizable purposes

Basically offering 4 active 0-5V analog 12-bit resolution inputs and a couple of 100Hz capable pulse-counting, its framework can support other industrial probe management (on-demand). Moreover, embedded temperature and ambient pressure sensors add values to the reports.
In specific use-cases, it can also manage digital outputs (pulse mode in battery-powered, continuous if main-powered).

Advanced features

When mechanical switches are connected to the counting inputs, a debouncing software filter can be activated to avoid faulty pulses. For all analog inputs and internal sensors, multiple sampling and dedicated configurable linear measure correction give a reliable read-to-use data.
All events in the device are stored in a readable table as well as each sensor reading. Alarms can be triggered by event (tamper…) or threshold limit measurement. Data is periodically sent as a spontaneous message or on-demand, either in Clover-Net or LoRaWAN protocol.
Seasonal schedules management and its 2 A size batteries make the device life time longer than ever.
Furthermore, other functionalities like Over The Air (OTA) firmware update or device usage management insure over time device full-featured and preventive maintenance operations.

High level protection

Designed to be hostile environment proof, their IP66 (potted IP68 in option) and IK08 protections added to flammability UL 94 HB give to this device the ability to be used in most constrained conditions, even with outgoing wires thanks to its IP67 grommets and O-ring seal.

Specifications :
Seller INEO-SENSE
Manufacturer name INEO-SENSE
SKU 547-1878-1
Manufacturer Part number ESG-LOG-CUPB-X89-521
Product Attributes Modules, Metering, Street lighting
RF Region EU868 - Europe 863-870MHz
LoRa Class Class A
Solution Represented Smart Agriculture, Energy and Utilities, Smart Industries
Power supply Non rechargeable battery
Battery specification (Wh) 3.6V 7.2A.h
RF power (dBm) +14dBm max
Battery type Lithium ion
Antenna Integrated
RF transceiver SX1276
Interfaces Analog, Numerique, Ethernet
Other interfaces LED, Button, RF
Operating Temperature (min to max) -20°C to +70°C
Depth (cm) 7.5
Width (cm) 13.0
Height (cm) 4.1
User manual url (wysiwig preferred) https://www.ineo-sense.com/downloads/doc/ESG-Logger-NRJ/02-Integration/InS-ESG-Logger-CloverNet%26LoRaWAN_Payloads-20200320-EN.pdf
Technical datasheet

https://www.ineo-sense.com/wp-content/uploads/2020/09/ESG-Logger-NRJ-EN.pdf

Certification CE, Other
Lead-time if backordered (in working days) 50
Lead-time if in Stock (in working days) 5
Share your thoughts for: INEO-SENSE - ESG-Logger-NRJ - Energy logger with 3 Rogosky probes 300A - EU868/US915 - IP55
Write a customer review

No questions asked yet.

Vendor Questions/Answers:
Ask your question
Only registered users can ask questions. Please Sign in or create an account