NETOP NB-IoT Configuration Cable

Due to NETOP Configuration Cable (software which works on Microsoft® Windows, included with purchase), buyer can change so many settings easily. So it gives super flexibility to users. Here is the list which you can change and set by using NETOP Configuration Cable:

• Firmware update
• Device Alive Message period
• LED indicator can be set turn on or off depend on user choice
• Device work schedule(so it can be set specific days and hours for your device(s) such as from Monday to Friday between 09:00 a.m and 18:00 p.m, and they work depend on the schedule)
• Read Period(how often your device(s) can get measurement) **
• Data Transmission period(how often your device(s) can send data) **
• Triggering (if you have 2, 3 or 4 sensors in a box, you can do triggering. It means that let’s say you have temperature&humidity, button and GPS sensor in a box. So you can say that if somebody pushs button, get GPS data and/or temperature&humidity data immediately; meaning Button is triggering GPS for this example etc.)
• Special NB-IoT settings such as Power Saving Mode(PSM), APN, IP and Port information

** explanation : The difference between “Read Period” and “Data Transmission Period” is, read period is a period for “getting measurement”. And data transmission period is a period for sending data. So if the read period is 15 minutes, and data transmission period is 60 minutes sensor get measurement every 15 minutes, and then send them(60/15 = 4 measurements) every 60 minutes.

$52.36
(VAT excluded)
Out of stock
Available on: 24-01-2019
Commercially available
This product is already in mass production. Production batches are in route or stock is available. All certifications for the regional areas where the products are sold are obtained from competent institutions.
  • device

Key features highlights :

MECHANICAL CHARACTERISTICS

  • Dimensions: 57 x 15 x 08 mm
  • Operating Range: -40 °C ~,+85 °C

Description :

Due to NETOP Configuration Cable (software which works on Microsoft® Windows, included with purchase), buyer can change so many settings of NETOP sensors easily. So it gives super flexibility to users. Here is the list which you can change and set by using NETOP Configuration Cable:

• Firmware update
• Device Alive Message period
• LED indicator can be set turn on or off depend on user choice
• Device work schedule(so it can be set specific days and hours for your device(s) such as from Monday to Friday between 09:00 a.m and 18:00 p.m, and they work depend on the schedule)
• Read Period(how often your device(s) can get measurement) **
• Data Transmission period(how often your device(s) can send data) **
• Triggering (if you have 2, 3 or 4 sensors in a box, you can do triggering. It means that let’s say you have temperature&humidity, button and GPS sensor in a box. So you can say that if somebody pushs button, get GPS data and/or temperature&humidity data immediately; meaning Button is triggering GPS for this example etc.)
• Special NB-IoT settings such as Power Saving Mode(PSM), APN, IP and Port information

** explanation : The difference between “Read Period” and “Data Transmission Period” is, read period is a period for “getting measurement”. And data transmission period is a period for sending data. So if the read period is 15 minutes, and data transmission period is 60 minutes sensor get measurement every 15 minutes, and then send them(60/15 = 4 measurements) every 60 minutes.

Specifications :
Seller NETOP TECHNOLOGY
Manufacturer name NetOP
Manufacturer Part number NTO-DVC-NB-CC2
Product Attributes Dev kit
Solution Represented Other
Interfaces RS232
Depth (cm) 5,7
Width (cm) 1,5
Height (cm) 0,8
Certification CE
Lead-time if backordered (in working days) 1-45 days
Is available for sale Yes
Lead-time if in Stock (in working days) 1-15 days
Share your thoughts for: NETOP NB-IoT Configuration Cable
Write a customer review

No questions asked yet.

Vendor Questions/Answers:
Ask your question
Only registered users can ask questions. Please Sign in or create an account