NETVOX WIRELESS 1-PHASE CURRENT METER WITH 1 X 75A CLAMP-ON CT R718N17 AS923

The NETVOX wireless single-phase current detector is used to detect single-phase electrical input current. The device is compatible with the LoRaWAN protocol, and integrates a chip module that conforms to the LoRaWAN wireless protocol to display the collected data in the gateway.

$127.93
(VAT excluded)
In stock
Production ready
Product design is finalized. Bill of Materials is finalized. An initial important batch of products to make the SKU commercially available is required, meaning no inventories are currently available and lead time is in months. All final certifications are not obtained yet but pre-testing has been operated and seller is 100% sure to obtain them. Datasheet and user guide should already be available.

Key features highlights :

Electric

Input Power 2 x 3.6V ER14505 lithium batteries parallel power supply (3.6V2400mah/section)
Sleeping Current 25uA
Wake up Current 7mA
Receiving Current (max) 11mA @3.3V
Transmitting Current (max) 127mA @3.3V
Battery Voltage Measurement Accuracy ±0.1V
Low Voltage Threshold 3.2V
Current Measurement Accuracy <+-1%
Current measurement Accuracy Range 100mA to 75A (depending on the current transformer configuration)

Frequency

TX Power 19dBm±1dBm
Rx Sensitivity -136dBm (LoRa,Spreading Factor=12, Bit Rate=293bps ) -121dBm (FSK,Frequency deviation=5kHz, Bit Rate=1.2kbps)
Antenna Type Build-in antenna
Communication Range Up to 10 km, the actual transmission distance depends on the environment.
Data Transfer Rate 0.3kbps~50kbps
Spread Technique LoRa/FSK
Available Frequency EU863-870, US902-928, AU915-928, KR920-923, AS923, CN470-510 Configured before shipment

Current Transformer

Rated Input Current 30A, 50Hz~60Hz
Rated Output Current 10mA
Saturation Current ≥75A
Ratio 3000:1
Load Resistance 10Ω
Accuracy Level 1%
Isolation Withstand Voltage 3000V
Housing Material Flame Retardant Grade 94-V0 UL Material
Environmentally Friendly In line with ROHS
Working Temperature -40°C~+85°C

Physical

Dimension Main Part: L: 112mm*W: 65mm*H: 32mm
Weight 141g
Environment Temperature Range -20℃ ~ 55℃
Environment Humidity Range <90% RH (No condensation)
Storage Temperature Range -40℃~+85℃


Description :

The NETVOX wireless single-phase current detector is used to detect single-phase electrical input current. The device is compatible with the LoRaWAN protocol, and integrates a chip module that conforms to the LoRaWAN wireless protocol to display the collected data in the gateway. The device is powered by battery and obtains the load AC current value through the current transformer. The device adopts the split-core current transformer, which can be conveniently connected to the measuring device.

Specifications :
Seller netvox
Manufacturer Name NETVOX
SKU 114-4770
Manufacturer Part Number R718N17
Product Capabilities AC current meter
RF Region AS923 - Asia 915-928MHz
LoRa Class Class A
Use Case Electric smart metering
Solution Represented Smart Cities, Energy and Utilities, Smart Building
Power Supply Replaceable battery
Battery specification (Wh) ER14505 battery AA SIZE (3.6V / section) parallel power supply
Battery type Lithium metal
Antenna Integrated
RF transceiver SX1276
Internal sensors utility Other
Operating Temperature (min to max) -20℃ ~ 55℃
Depth (cm) 3.2
Width (cm) 6.5
Height (cm) 11.2
Technical Documents
Seller conditions Seller commercial condition
Seller shipping condition
Share your thoughts for: NETVOX WIRELESS 1-PHASE CURRENT METER WITH 1 X 75A CLAMP-ON CT R718N17 AS923
Write a customer review

No questions asked yet.

Vendor Questions/Answers:
Ask your question
Only registered users can ask questions. Please Sign in or create an account