NETVOX WIRELESS MA CURRENT METER INTERFACE, 4~20MA R718KA AS923

The Netvox R718KA device is used to detect signal 4mA-20mA equipment, which uses the SX1276 wireless communication module. R718KA can detect 4mA-20mA signal, and add the detection signal data to the gateway, and the collected data will be displayed in the data center.

$93.86
(VAT excluded)
In stock
Production ready
Product design is finalized. Bill of Materials is finalized. An initial important batch of products to make the SKU commercially available is required, meaning no inventories are currently available and lead time is in months. All final certifications are not obtained yet but pre-testing has been operated and seller is 100% sure to obtain them. Datasheet and user guide should already be available.

Key features highlights :

Electric

Input Power 2 x 3.6V ER14505 AA lithium batteries (3.6V2400mah/section)
Sleeping Mode 21uA
Wake up Mode 6.3mA@3.3V
Receiving Current (max) 11mA @3.3V
Transmitting Current (max) 120mA/3.3V
Battery Voltage Measurement Accuracy ±0.1V
Low Voltage Threshold 3.2V


Frequency

TX Power 19dBm±1dBm
Rx Sensitivity -136dBm (LoRa,Spreading Factor=12, Bit Rate=293bps ) -121dBm (FSK,Frequency deviation=5kHz, Bit Rate=1.2kbps)
Antenna Type Build-in antenna
Communication Range 10 km (line-of-sight, the actual transmission distance depends on the environment)
Data Transfer Rate 0.3kbps~50kbps
Spread Technique LoRa/FSK
Available Frequency US915 AU915 AS923 EU868 KR920 CN470 Configured before shipment


Physical

Dimension Main Part: L: 112mm*W: 65mm*H: 32mm
Weight 141g
Environment Temperature Range -20℃ ~ 55℃
Environment Humidity Range <90% RH (No condensation)
Storage Temperature -40℃ ~ 85℃


Description :

This device is used to detect signal 4mA-20mA equipment, which uses SX1276 wireless communication module. R718KA can detect 4mA-20mA signal, and add the detection signal data to the gateway, and the collected data will be displayed in data center.

Typical applications for 4 mA to 20 mA products are sensing and instrumentation measurement applications. The signal current of general instrumentation is 4-20mA, which means the minimum current is 4mA and the maximum current is 20mA. There are many kinds of sensors in the industrial field that can be converted into 4~20mA current signals. This device converts the 4mA-20mA signal into an appropriate detection signal through the operational amplifier, and then samples the current value through the module ADC sampling.

Specifications :
Seller netvox
Manufacturer Name NETVOX
SKU 114-4735
Manufacturer Part Number R718KA
RF Region AS923 - Asia 915-928MHz
LoRa Class Class A
Solution Represented Smart Cities
Power Supply Non rechargeable battery
Battery specification (Wh) 2 x 3.6V ER14505 AA lithium batteries
Power Supply 3.6V
Battery type Lithium metal
Antenna Integrated
RF transceiver SX1276
Operating Temperature (min to max) -20℃ ~ 55℃
Depth (cm) 3.2
Width (cm) 6.5
Height (cm) 11.2
Technical Documents

Seller conditions Seller commercial condition
Seller shipping condition
Share your thoughts for: NETVOX WIRELESS MA CURRENT METER INTERFACE, 4~20MA R718KA AS923
Write a customer review

No questions asked yet.

Vendor Questions/Answers:
Ask your question
Only registered users can ask questions. Please Sign in or create an account