RisingHF LoRaWAN Modem RHF3M076 US915
Key features highlights :
- plug &play device
- controlled via USB/Serial interface with AT command
- support LoRaWAN protocol
- support maximum 20dBm output power at low band and maximum 14dBm at high band, programmable with 1dB step
- operating frequency bands : 434MHz 470MHz 868MHz 915MHz.
- low band and high band share the same antenna port
RisingHF LoRaWAN modem is a plug & play end device for LoRaWAN network. It can be controlled by computer with AT command via USB/serial port. It supports LoRaWAN protocol and can communicate with Lora concentrator/gateway in a simple way. The modem could be used for noise floor sweep or as point-to-point demo for range test. It supports test mode to output CW and receiver mode for RF performance test under Lora mode.
RisingHF's modem not only supports the LoRaWAN stack, but also could be as normal LoRa transceiver controlled via AT command.
When using the RHF3MO76, there is a simple way to test its Class C function. You can simply use two of these RisingHF modems, no gateway or server is needed. User can easily and effectively use on modem as a LoRaWAN node and the other modem as a 'tester' to test the function.
There are many cases that this device can be used for:
- As a LoRaWAN Node or Protocol Analyser
- Performance Measurement
- Ping Pong Test with LoRa
|Seller||Rui Xing Heng Fang Network(Shenzhen)Co.,Ltd|
|Manufacturer Part number||RHF3M076|
|RF Region||US915 - US 902-928MHz|
|LoRa Class||Class A, Class B|
|Solution Represented||Facilities Management|
|Battery type||12V input|
|Antenna||External on connector|
|Is available for sale||Yes|
|Specific commercial conditions||
100pcs+, contact us for the lead-time.
No questions asked yet.