ROSSMA LoRaWAN Measuring and switching device IIOT-AMS SMOKE DETECTOR A83CCB EU868
ROSSMA IIOT-AMS Smoke Detector switching device is used for autonomoys wireless operation of smoke sensor and is designed to monitor and record changes in smoke sensor status, as well as to transmit an alarm event in LoRaWAN or NBiOT network when switching to "Fire" mode.
The switching device can be used in industrial enterprises, infrastructure of housing and communal facilities, in hard-to-reach places (wells, basements).
Capabilities: sound siren when activating, sending message when activating, constant smoke control, sending messages with operation parameters and air temperature in standby mode
Key features highlights :
Features:
Sound alarm when activating (can be switched off)
Sending message when activating
Sending messages in duty mode about parameters of working capacity and air temperature
Constant control of smoke
Description :
The ROSSMA IIOT-AMS Smoke Detector switching device is used for autonomous wireless operation of the smoke sensor and is designed to monitor and to record the change in the state of the smoke sensor, as well as to switch to the "Fire" mode for sending an alarm event in LoRaWAN or NBiOT network.
The switching device is designed to detect fire accompanied by appearance of low concentration smoke in closed premises of various buildings and structures by recording optical radiation reflected from smoke particles and issuing alarm notifications in the form of loud audio signals.
The switching device can be used in industrial enterprises, infrastructure of housing and communal facilities, in dry premises. The sensor must be attached to the ceiling or to the wall. The ROSSMA IIOT-AMS Smoke Detector switching device has two power supplies - the sensor element has its own independent power supply- 9 V battery, and the data module with the 3.6 V power cell. The switching device power cell is a built-in battery designed for up to 5 years when counting readings and transmitting data once a day. Supports two methods of activation in LoRaWAN network - ABP and OTAA. The default activation method is OTAA. You can specify one way by using a special command sent to the switching device in LoRaWAN network. Radio range in urban development is up to 5 km, in rural areas- up to 15 km. The frequency plan is switched remotely over the LoRaWAN network.
| Seller | Rossma LTD |
|---|---|
| Manufacturer name | ROSSMA |
| SKU | 1391-9473 |
| Manufacturer Part number | A83CCB |
| Product Attributes | Smoke Detection |
| RF Region | EU868 - Europe 863-870MHz |
| LoRa Class | Class A |
| Solution Represented | Daily Life |
| Power supply | Non rechargeable battery |
| Battery specification (Wh) | max. 2.2 Ah |
| Battery type | Lithium ion |
| Antenna | Integrated |
| RF transceiver | SX1272 |
| Interfaces | Analog |
| Operating Temperature (min to max) | -40 to +85 |
| Depth (cm) | 2 |
| Width (cm) | 15 |
| Height (cm) | 15 |
| User manual url (wysiwig preferred) | rossma.ru |
| Certification | Other |
| Technical documents |
|
No questions asked yet.