Ruictec - Smart Tracker

The tracker is an intelligent hardware based on LoRaWAN transmission. It's mainly used for vihicle positioning and asset management. It has built-in motion, Bluetooth, GNSS and other sensors, combined with the external Bluetooth beacon, which can be used not only as a tracking device for indoor and outdoor vihicle positioning, but also as a Bluetooth gateway for asset location management. It can provide users with location services with accuracy from 1 meter to 4 meters indoor and 5 meters outdoor. Compared with other schemes, the scheme combining tracker and beacon has the advantages of low cost, convenient deployment, long standby time and so on, and is suitable for the scene with high positioning accuracy.

$68.04
(VAT excluded)
In stock
Usually delivered in 7 working days
Production ready
Product design is finalized. Bill of Materials is finalized. An initial important batch of products to make the SKU commercially available is required, meaning no inventories are currently available and lead time is in months. All final certifications are not obtained yet but pre-testing has been operated and seller is 100% sure to obtain them. Datasheet and user guide should already be available.

Key features highlights :

  • LoRaWAN 1.0.3 compliant
  • The tracker works in OTAA mode and Class A mode by default, but it can also be set as ABP mode by BLE configure. In both modes, DevEUI, AppEUI and AppKey, or DevAddr, NwkSkey and AppSkey, frequency can be changed by BLE.
  • Indoor location is based on BLE, cooperate with our company localization algorithm, provide precision of 1 ~ 4 meters, the probability of less than three meters is 70%, we provide platform for free use.
  • Outdoor location is based on GPS, with precision of 5 meters.
  • Support Quuppa system, based on the BLE AOA high precision positioning, precision is less than 1 m.
  • 3200 mA rechargeable lithium battery, support overcharge and high temperature protection, standby time can be up to 6 months.
  • Solar panel charge, 1.2W, 200mA charging current.
  • Bluetooth OTA upgrade, supports batch update with the help of dongle, we'll provide the free software.
  • Support iBeacon protocol and third-party custom defined BLE formats, support for up to five kinds of BLE custom formats.
  • Beacon white list mechanism, scan only specific UUID beacon, support for up to five different UUID.
  • Intelligent motion sensor, enter sleep state when stationary, power consumption is less than 20uA.
  • During specified time, such as night, device can enter deep sleep, power consumption is less than 10uA.
  • Intelligent scanning to save power, don’t start BLE scanning if move steps under the threshold.
  • Security social distance monitoring, device will sound or vibrate if people are too close, the distance threshold is adjustable;
  • The tracker can also detect asset beacons to implement localization and asset management dual mode.
  • The tracker can be set as a BLE gateway, to detect and report at most 50 BLE beacons in one single transmission

Description :

The tracker supports both BLE and GNSS location. To support BLE location, the BLE beacons need to be deployed around the tracker, the tracker gets its position by detecting the BLE signal.

If no beacon signal is scanned, the tracker will turn on GNSS module to get satellite signal, vice versa, if beacon signal is scanned, GNSS main power will be turned off with backup power on.

The badge can work as an Quuppa AOA tag, if it detects an AOA locator exists by BLE broadcast, it will send AOA packet every 500ms to the locator. The broadcast UUID of the locator must be A3FDED9A-87E2-4C2E-9E2F-5B7A2AC2AF05, else the AOA function will not be enabled. If the tracker is out of the range of AOA, it will stop AOA function.

The tracker can also work as a beacon, if it detects special beacon, it will scan BLE interleaved with broadcast. This feature is designed for a special case when the tracker is in an environment with poor Lora signal, such as shield room, the beacon mode can be turned on and the signal can be sent out with the help of Bluetooth gateway, which must be deployed in a place with good signal, such as the gate of the building.

Specifications :
Seller RUICTEC
SKU 1884-14549
Product Attributes Geolocation
LoRa Class Class A
Other protocol Bluetooth Low
Solution Represented Location & Asset Tracking
Battery type Lithium ion
Antenna Integrated
RF transceiver Other
Interfaces Bluetooth, USB
Depth (cm) 6
Width (cm) 9.4
Height (cm) 14.8
User manual url (wysiwig preferred) https://www.rctiot.com/rct/How%20to%20setup%20location%20system%20with%20TTN.pdf
Technical datasheet

https://www.rctiot.com/rct/RCT_Tracker_Datasheet.pdf

Other technical documents https://www.rctiot.com/rct/RCT_Tracker_Data_Parse.pdf
Lead-time if backordered (in working days) 14
Lead-time if in Stock (in working days) 7
Specific commercial conditions

When the customer receives the goods, he can clear the customs by himself.

If the purchased equipment is less than 10, we will deliver the goods within three working days, otherwise, we will deliver the goods within seven working days.
Because the device contains batteries, it cannot be directly transported by air. It needs to be sent to a freight forwarder in Shenzhen, who will arrange the delivery. It will take about two days for the goods to arrive in Shenzhen, and it will take two days for the forwarder to arrange the delivery. That is to say, it will take about 7 working days from placing the order to the actual delivery of the goods if less than 10 devices are purchased from the customer, and 14 working days from placing the order to the actual delivery of the goods if more than 10 devices are purchased. According to freight companies, it takes 6 to 10 working days for goods to travel from port to destination.

Share your thoughts for: Ruictec - Smart Tracker
Write a customer review

No questions asked yet.

Vendor Questions/Answers:
Ask your question
Only registered users can ask questions. Please Sign in or create an account