Sensing Labs Senlab Radio Transmitter TOR-LAB-13NS EU868

Use: radio transmitter for conducting remote on/off or open/closed monitoring. This device can detect the status of transistors or switches.

It is more commonly used in the following fields of application: monitoring the status of machines and engines, garage door or fire door opening alarm.

$111.15
(VAT excluded)
Out of stock
Available on: 21-06-2019
Commercially available
This product is already in mass production. Production batches are in route or stock is available. All certifications for the regional areas where the products are sold are obtained from competent institutions.
  • Buy 50 for $100.04 each and save 10%
  • device

Key features highlights :

  • LoRa Alliance Certified
  • Up to 20 years of battery life
  • Up to 15km of range
  • Datalogging (24 points / radio transmissions)
  • Battery level feedback on each data communications
  • Smart "Alert + Acknowledgment" system
  • Easy to install (magnet activation, LED feedback)
  • Cloud codecs enabled
  • Application reconfiguration Over The Air (measurement frequency for monitoring mode,...)
  • IP 68: fully protected against dust, submersible to 1 m for 30 mins
  • EMC Compliance ETSI EN 301 489-1, ETSI EN 301 489-3, EN 61000-6-2

Description :

This smart LoRaWAN™ communicating device called Senlab D has a digital input for ‘on/off’ or ‘close/open’ state detection. Therefore, Senlab D is capable of detecting the status of relays, transistors or switches. Senlab D can either operate in counting mode or alerting mode:

  • In counting mode, you will receive periodically the number of transition the device monitored
  • In alerting mode, you will receive a radio message each time the Senlab_D detects a change of state

With Senlab D, will enhance your security or preventive maintenance efforts.

The connector and its counter part will allow you to quickly and easily link the Senlab to the sensor or relay to suit your application.

The ruggedized and IP68 design (protected against water and dust ingress) mean this Senlab is well suited for continuous monitoring in harsh environments. Sensing Labs devices are engineered with a very particular attention to the custom antenna design, bringing best of class performances to Senlab devices, both on the range and battery life. Ready to be used on an LPWA Actility Network. For all private or other public network, you need to buy a configuration pack. Part Number: CON-LAB-PACK To download the datasheet of this product, click here.

ThingPark Connected devices have been extensively tested through LoRaWAN use cases and application integration to confirm interoperability in networks powered by Actilitys network server and management software. ThingPark has been selected by market leaders such as Orange, Proximus, Swisscom, Cisco, Inmarsat, KPN, and more. Learn more here: https://partners.thingpark.com

Specifications :
Seller SENSING LABS
EAN TOR-LAB-13NS
Seller SKU TOR-LAB-13NS
Product Attributes Bridges
RF Region EU868 - Europe 863-870MHz
Solution Represented Smart Cities, Smart Industries, Smart Operations, Smart Building, Smart Metering
Power supply Rechargeable battery
RF power (dBm) 25mW
Output throughput (mW) +14dB
Antenna Integrated
RF transceiver SX1272
Depth (cm) 3,5
Width (cm) 5,6
Height (cm) 10,2
Technical docs

Certification LoRa® Alliance, CE, RoHS, Other, Orange LoRa®
Lead-time if backordered (in working days) 21
Is available for sale Yes
Lead-time if in Stock (in working days) 14
Specific commercial conditions

Products will not be returned or exchanged. Warranty : 1 year after purchase.

Technical documents SL-TOR-LAB-13NS.pdf
Share your thoughts for: Sensing Labs Senlab Radio Transmitter TOR-LAB-13NS EU868
Write a customer review

2 Item(s)

Show per page
Fabrice Passaquay asks vendor SENSING LABS

Hi, it says that the range is up to 15 km. But if it uses LoraWan network (LPN) shouldn't it be more ? The range is whereever the network is reachable, right ? Best Regards

A: Good morning, "range is up to 15 km" is between one device and one network antenna (in line of sight). So if you have many network antenna, of course you can cover larger area. The condition is that all Lora Antenna must be connected to 1 centralized LoraWan network server, and that you device is at least cover by 1 of your antenna (from the RF range point of view)

Johan Deleu asks vendor SENSING LABS

How many digital inputs has the TOR-LAB-13NS EU868? I need a LoRa sensor with at least 2 digital inputs.

A: Hi Johan It has 1 input but the price for 2 Senlab sensors products is the same as if you bought 1 device with 2 inputs. Regards, Céline

2 Item(s)

Show per page
Vendor Questions/Answers:
Ask your question
Only registered users can ask questions. Please Sign in or create an account