Tinovi - LoRaWAN IO Module

LoRaWAN IO Module with built in pulse counter and optional Soil Moisture sensor, Air temperature/humidity/pressure, Light Lux, 12v reversable pulse switch output.

 

 

$48.48
(VAT excluded)
Out of stock
Available on: 03-05-2023
Commercially available
This product is already in mass production. Production batches are in route or stock is available. All certifications for the regional areas where the products are sold are obtained from competent institutions.

Key features highlights :

Features

  • 20uA sleep current consumption
  • Single or Double Tinovi Soil Moisture/Temperature sensor option
  • BME280 Air Temperature/Humidity/Pressure sensor option (Not waterproof)
  • OPT3001 light lux sensor option
  • 12v booster pulse solenoid reverse switch output option
  • Pulse counter
  • Water leak detector and latching valve control output trigger
  • Dust and waterproof IP67
  • LoRaWAN v 1.0.2 class A device, may be activated with OTAA or ABP.
  • Setup via USB CDC-ACM virtual COM port.
  • Android application for USB setup

 

Description :

Electrical Properties

 

 

Min/Sleep

Typical

Max

Supply voltage (VCC), V

2.5

3.6

6

Working current(VCC=3.6V), mA

Sleep 0.02 mA

22

150

Operating Temperature Range, Celsius

-20

25

70

 

Sensor sleep mode consumes   20uA  or 0.02mA.  Active mode consumption 12-24 mA depending on sensor configuration and 150 mA in short transmitting mode.

 

The required battery is 3.7v 18650.

 

The device may be powered from any 5v Micro-USB power source. After powering up,  sensors wait 10 seconds for the USB configuration session connection from the android application or USB CDC terminal, if none is connected sensors turn off USB hardware and start normal operation. The device should be restarted, before attaching it to the USB for configuration, which means the battery should be removed

Android application

The android application lets you configure and calibrate soil moisture sensors on your device.

  • When installing the application you have to allow the application to use your phone’s USB port.
  • You need a USB-OTG connector - an adapter on your phone side - Micro-USB or USB-Type-C and Micro-USB charging cable to - connect the device to the USB OTG phone adapter.
  • Before connecting to your phone you have to remove the battery from the device to reset the device.
  • After connecting the device android phone will ask you to allow connect to the USB, and approve it.
  • Wait while the application shows USB Connected on the main page.
  • Click read on the main page to read sensor values.
  • Switch to settings to set up your device

Link: https://play.google.com/store/apps/details?id=com.tinovi.soilmaster

3.7v 18650, Battery is not included!!!

 

Specifications :
Seller Tinovi
Manufacturer name Tinovi
SKU 867-8581
Manufacturer Part number PM-IO-5-SM
Seller SKU PM-IO-5-SM
Product Attributes Metering, Street lighting, Temperature
RF Region EU868 - Europe 863-870MHz
LoRa Class Class A
Other protocol LoRaWAN
Solution Represented Smart Agriculture, Smart Cities, Energy and Utilities, Smart Industries, Home, Facilities Management, Smart Building, Smart Metering
Power supply Rechargeable battery
Battery specification (Wh) 3.7v 18650
Battery type Lithium ion
Antenna Integrated
RF transceiver SX1276
Interfaces I2C, Analog, USB
Other interfaces USB
Operating Temperature (min to max) -20C to 60C
Depth (cm) 13
Width (cm) 8
Height (cm) 3,5
User manual url (wysiwig preferred) https://tinovi.com
Technical datasheet

PM-IO-5-SM Datasheet: 

Lead-time if backordered (in working days) 30
Lead-time if in Stock (in working days) 5
Specific commercial conditions

Ask for bulk prices.

Technical documents
Seller conditions Seller commercial condition
Seller shipping condition
Share your thoughts for: Tinovi - LoRaWAN IO Module
Write a customer review

No questions asked yet.

Vendor Questions/Answers:
Ask your question
Only registered users can ask questions. Please Sign in or create an account