WATTECO - TORAN'O AtEx zone 1 IP68 - 50-70-150

Key features highlights :

APPLICATIONS

• In explosive atmospheres, read index values from gas, electricity, water or energy meters with pulse output; load curve monitoring.
• Detection of leaks, fraud and tear off.
• Check the condition of mechanical pressure switches located in sensitive areas.
• Associated with a pressure probe, measurements on a gas network.

BENEFITS & FEATURES

• LoRaWAN®, Class A
• Easy to install and use
• 3 pulse inputs or status reports
• 3 analog inputs:
  • 2x 0-5V
  • 1x 4-20mA
• 2 power supply outputs: ~5Vdc and ~16Vdc
• SAFT LS17500 Lithium battery on holder
• Differential data compression
• IP55 or IP68
• Up to 8 years of autonomy

CERTIFICATION

• RED, RoHS
• AtEx Zone 1 certification according to marking:
  • Ex II 2 G
  • Ex ib IIB, IIC T4 Gb
  • -20 ≤ Tamb ≤ +50°C

Description :

The TORAN'O AtEx zone 1 sensor allows metering from the pulse output of water, gas, electricity or energy meters to monitor consumptions. The TORAN'O sensor enables all your mechanical pressure switches in AtEx zone 1 explosive atmospheres to communicate with one another and to report state changes. It transforms existing meters into communicating meters via a public or private LoRaWAN® network.

Associated with a pressure probe, the TORAN'O AtEx zone 1 sensor allows the pressure information to be transmitted to the LoraWAN® network.

Installation and commissioning are quick and easy.

The sensor has:

• a switch used for its activation and deactivation,
• 2 LEDs to monitor the configuration and pairing to the network.

Counting data can be stored in the local memory and compressed before being transmitted over the public or private LoRaWAN® network. This reporting technique is particularly suitable for transmitting load curves as it considerably reduces the amount of data transmitted while preserving the autonomy of the sensor.

When powered by a SAFT 3.6V/3600mAh Lithium battery, the autonomy of the sensor is 10 years (data compression mode) with a configuration that performs one measurement per day and one transmission per day.

Installation, maintenance and operation must be carried out exclusively by a technician qualified for the use of electrical equipment in explosive atmospheres as defined in EN 60079-14.