WATTECO - VENTIL'O - 50-70-101
VENTIL'O measures air vacuum pressure in a Continuous Mandatory Ventilation (CMV) system or Air Handling Unit (AHU). Periodically or upon exceeding a configured threshold, VENTIL'O uploads its data via a LoRaWAN® network.
- Buy 15 for $166.84 each and save 8%
- Buy 100 for $152.67 each and save 16%
Key features highlights :
APPLICATIONS
- Supervision of CMV or AHU
BENEFITS & FEATURES
- LoRaWAN®, Class A
- Easy to install and use
- Differential data compression
- Autonomy > 10 years
- Depression measurement
- Measuring range: 0 / + 500Pa
- Accuracy: -/+10Pa from 0 to 200Pa; -/+5.5% beyond this range
- Resolution: 1 Pa
- Room temperature measurement
- Measuring range: -20°C to +60°C
- Accuracy: -/+2°C between -10°C and +60°C
- Resolution: 0.1°C
- IP65 tropicalised
- Optional digital input to monitor equipment status
CERTIFICATION
- RED, RoHS
Description :
The VENTIL'O device is a battery-powered IoT sensor that allows the monitoring of a Continuous Mandatory Ventilation (CMV) system or Air Handling Unit (AHU) by periodically taking vacuum pressure measurements.
The following data is periodically transmitted over the LoRaWAN® network:
- Average of vacuum pressures measured,
- Minimum and maximum vacuum pressure measured,
- Low battery voltage
- Trigger input (if option used)
In the event of a threshold being exceeded, an alarm is transmitted.
Powered by a battery, the autonomy of the sensor is greater than 10 years for a configuration with a vacuum pressure measurement every 15 minutes and a transmission every 6 hours.
The sensor should be installed away from direct sunlight, rain, and temperature variations so as not to affect these measurements.
Installation and commissioning are quick and easy. The sensor is equipped with:
- 2 tubes of 200cm and 2 pipettes for connection to the housing or duct,
- A magnetic switch to activate or deactivate the sensor,
- An NFC identification tag (product code, serial number, batch number).
VENTIL'O+ can be connected to external equipment using an additional input. With this option, a trigger forces an additional measurement. Typically, it monitors a mechanical vacuum pressure switch.
| Seller | nke WATTECO |
|---|---|
| Manufacturer name | WATTECO |
| SKU | 1890-14615 |
| Manufacturer Part number | 50-70-101 |
| Seller SKU | 50-70-101 |
| RF Region | EU868 - Europe 863-870MHz |
| LoRa Class | Class A |
| Solution Represented | Smart Agriculture, Smart Cities, Energy and Utilities, Smart Industries, Facilities Management, Smart Operations, Smart Building, Smart Metering |
| Power supply | Non rechargeable battery |
| Battery type | Lithium ion |
| Output throughput (mW) | 25 |
| Antenna | Integrated |
| RF transceiver | SX1272 |
| Interfaces | Other |
| Operating Temperature (min to max) | -20°C to +50°C |
| Depth (cm) | 9.2 |
| Width (cm) | 5.6 |
| Height (cm) | 9.2 |
| Technical datasheet | |
| Lead-time if backordered (in working days) | 20 |
| Lead-time if in Stock (in working days) | 5 |
| Seller conditions |
Seller commercial condition Seller shipping condition |
No questions asked yet.