NETVOX WIRELESS 2-INPUT PUSH BUTTON INTERFACE R718T2 AS923

The Wireless 2-Input Push Button Interface allows a notification signal to be sent when connected push
button is pushed. When someone is in danger and needs emergency assistance, press the emergency push button device; R718T2 immediately sends an alarm message to the gateway.

$120.49
(VAT excluded)
In stock
Production ready
Product design is finalized. Bill of Materials is finalized. An initial important batch of products to make the SKU commercially available is required, meaning no inventories are currently available and lead time is in months. All final certifications are not obtained yet but pre-testing has been operated and seller is 100% sure to obtain them. Datasheet and user guide should already be available.

Key features highlights :

Electric

Input Power 2 x 3.6V ER14505 AA lithium batteries (3.6V2400mah/section)
Sleeping Mode 24uA
Wake up Mode 6.3mA@3.3V
Low Voltage Threshold 3.2V
Transmitting Current (max) 120mA/3.3V
Battery Voltage Measurement Accuracy ±0.1V
Receiving Current (max) 11mA @3.3V
Wireless 2-Input Push Button Interface

Frequency

TX Power 19dBm±1dBm
Rx Sensitivity -136dBm (LoRa,Spreading Factor=12, Bit Rate=293bps )
                        -121dBm (FSK,Frequency deviation=5kHz, Bit Rate=1.2kbps)
Antenna Type Build-in antenna
Communication Range 10 km (line-of-sight, the actual transmission distance depends
on the environment)
Data Transfer Rate 0.3kbps~50kbps
Spread Technique LoRa/FSK
Available Frequency US915 AU915 AS923 EU868 KR920 CN470
Configured before shipment


Physical

Dimension Main Part: L: 112mm*W: 65mm*H: 32mm
Weight 150g
Environment Temperature Range -20℃ ~ 55℃
Environment Humidity Range <90% RH (No condensation)
Storage Temperature -40℃ ~ 85℃


Description :

General Description
The Wireless 2-Input Push Button Interface allows a notification signal to be sent when connected push
button is pushed. When someone is in danger and needs emergency assistance, press the emergency push
button device; R718T2 immediately sends an alarm message to the gateway.


Principle of Operation
The device can be connected to an external emergency puch button device (2 lines connected to the 2 end
of the emergency switch button) that can detect the on or off signal of the emergency switch button. It
uses the SX1276 wireless communication module.

Specifications :
Seller netvox
Manufacturer name Netvox
SKU 114-6508
Manufacturer Part number R718T2
Product Capabilities Button
RF Region AS923 - Asia 915-928MHz
LoRa Class Class A
Use Case Emergency Button
Solution Represented Smart Cities, Smart Building
Power supply Replaceable battery
Battery specification (Wh) 2x 3.6V ER14505 AA lithium batteries
Battery type Lithium metal
Antenna Integrated
RF transceiver SX1276
Interfaces Other
Internal sensors utility Touch
Operating Temperature (min to max) -20℃ ~ 55℃
Depth (cm) 3.2
Width (cm) 6.5
Height (cm) 11.2
Technical documents
Seller conditions Seller commercial condition
Seller shipping condition
Share your thoughts for: NETVOX WIRELESS 2-INPUT PUSH BUTTON INTERFACE R718T2 AS923
Write a customer review

No questions asked yet.

Vendor Questions/Answers:
Ask your question
Only registered users can ask questions. Please Sign in or create an account