NETVOX WIRELESS PUSH BUTTON INTERFACE R718T

The wireless push button interface allows a notification signal to be sent when the connected push button is pushed. When someone is in danger and needs emergency assistance, press the emergency push button device; R718T immediately sends an alarm message to the gateway.

$86.30
(VAT excluded)
In stock
Commercially available
This product is already in mass production. Production batches are in route or stock is available. All certifications for the regional areas where the products are sold are obtained from competent institutions.

Key features highlights :

Electric

  • Input Power 2 x 3.6V ER14505 AA lithium batteries (3.6V2400mah/section)
  • Sleeping Mode 22uA
  • Wake up Mode 6.3mA@3.3V
  • Low Voltage Threshold 3.2V
  • Transmitting Current (max) 120mA/3.3V
  • Battery Voltage Measurement
  • Accuracy ±0.1V

Frequency

  • TX Power 19dBm±1dBm
  • Rx Sensitivity -136dBm (LoRa,Spreading Factor=12, Bit Rate=293bps )
                           -121dBm (FSK,Frequency deviation=5kHz, Bit Rate=1.2kbps)
  • Antenna Type Build-in antenna
  • Communication Range Up to 10 km, the actual transmission distance depends on the environment.
  • Data Transfer Rate 0.3kbps~50kbps
  • Spread Technique LoRa/FSK
  • Available Frequency US915 AU915 AS923 EU868 KR920 CN470 Configured before shipment

Physical

  • Dimension Main Part: L: 112mm*W: 65mm*H: 32mm
  • Weight 141g
  • Environment Temperature Range -20℃ ~ 55℃
  • Environment Humidity Range <90% RH (No condensation)
  • Storage Temperature -40℃ ~ 85℃

 

 

Description :

General Description

The wireless push button interface allows a notification signal to be sent when a connected push button is pushed. When someone is in danger and needs emergency assistance, press the emergency push-button device; R718T immediately sends an alarm message to the gateway.

Principle of Operation

The device can be connected to an external emergency push button device (2 lines connected to the 2 ends of the emergency switch button) that can detect the on or off signal of the emergency switch button. It uses the SX1276 wireless communication module.

Specifications :
Seller netvox
Manufacturer Name Netvox Technology Co., Ltd.
SKU 114-6505
Manufacturer Part Number R718T
Product Capabilities Button
LoRa Class Class A
Other Protocol LoRaWAN
Use Case Attendance monitoring
Solution Represented Smart Cities, Smart Building, Daily Life
Power Supply Replaceable battery
Battery specification (Wh) 2x 3.6V ER14505 AA lithium batteries
Battery type Lithium metal
Antenna Integrated
RF transceiver SX1276
Internal sensors utility Touch
Operating Temperature (min to max) -20℃ ~ 55℃
Depth (cm) 3.2
Width (cm) 6.5
Height (cm) 11.2
Technical Documents

Seller conditions Seller commercial condition
Seller shipping condition
Share your thoughts for: NETVOX WIRELESS PUSH BUTTON INTERFACE R718T
Write a customer review

No questions asked yet.

Vendor Questions/Answers:
Ask your question
Only registered users can ask questions. Please Sign in or create an account