zDoor-LORAWAN CONTACT AND REED SENSOR z01346

Key features highlights :

• zDoor has a dry contact input terminal.
• The device can be used to report any changes on the input. This makes this product great for example sending an alarm signal or changed activity of an equipment.
• The module can count pulses and report the number of counted signals also.
• The device reports keep-alive signals. The period of this is adjustable by downlink message if needed with a range between 5min-1day.
• When any triggers occurred the device reports it immediately to the LoRaWAN network by unconfirmed or confirmed message (this parameter is configurable).
• Battery lifecycle is subject of the number of daily reported messages. One set of good quality battery (2xAA) can send approx. 100.000 messages. In typical usage it can be enough for several years.

Description :

zDoor has a dry contact input terminal. The device can be used to report any changes on the input. For example alarm signal or activity of an equipment. The module can count pulses. In this case it is possible to use to report the number of the counted signals. The device reports keep-alive signals. The period of this is adjustable by downlink message if needed. The range of this: 5min-1day.

When any triggers occurred the device reports it immediately to the LoRaWAN network by unconfirmed or confirmed message (this parameter is configurable).

Battery lifecycle is subject of the number of daily reported messages. One set of good quality battery (2xAA) can send approx. 100.000 messages. In typical usage it can be enough for several years.

Configurable parameters:

-       accel on/off

-       magnetometer on/off

-       accel sensitivity

-       magnetometer sensitivity

-       reed/contact input on/off

-       keepalive message interval (5min…1day)

-       LoRaWAN datarate

-       authentication mode (OTAA or ABP)

-       message type (confirmed or unconfirmed)

-       divider (in counter mode the user can specify how many pulses reported)