Smartico Industrial Sensor NB-IoT "IS-NB"

The Industrial Sensor NB-IoT "Smartico IS-NB" is used in various fields of industry, utilities and automation, for remote data collection and transmission via LoRaWAN networks. The device contains many interfaces, such as: 4xDI, 2xDO, 2x1-10V, 2x4-20mA, RS485/232, 1-WIRE, etc. The sensor is powered by an internal battery or an external DC voltage source.

(VAT excluded)
Out of stock
Available on: 18-07-2023
Commercially available
This product is already in mass production. Production batches are in route or stock is available. All certifications for the regional areas where the products are sold are obtained from competent institutions.

Key features highlights :

Protection from external influences and transmission of an alarm message to the server.

Monitoring and transmission of the following additional parameters:
  • the presence of an external magnetic field;
  • battery discharge;
  • monitoring the performance of internal sensors;
  • control of impacts and changes in position;
  • line control (connected, disconnected, short circuit);
  • external power source control.

Built-in non-volatile memory for data logging, built-in real-time clock.

High-level protocols support by customer's request: COAP, LWM2M, DTLS, MQTT

Exclusion of the human factor when taking data measurements from metering devices.

Available with an integrated chip antenna or an external antenna.

Two LEDs for indication of operating modes located on the PCB

Small dimensions, easy installation.

Battery life is more than 5 years.

Description :

The Industrial Sensor LoRaWAN "Smartico IS-LR" is used in various fields of industry, utilities and automation, for remote data collection and transmission via NarrowBand networks. The device has universal digital inputs, analog inputs for measuring standard 4-20mA / 0-10V signals, serial interfaces RS485/232, 1-WIRE, inputs for monitoring the integrity of communication lines. The device is equipped with an internal battery and also has a built-in voltage converter that provides operation from an external DC voltage source. There are two outputs for controlling external devices. The design of the sensor in a waterproof housing allows external use. The compact size allows installation in confined spaces, and special adapters provide reliable mounting to a pipe or flat surface without opening the enclosure.



Compliance with LTE

Cat NB1

Frequency Bands

B1, B3, B5, B8, B20, B28

Data encryption


Digital inputs


Analog inputs 4-20mA


Analog inputs 0-10V


Line control inputs


Serial interface

RS485/232, 1-WIRE



Maximum output load current, mA


Connection of external antenna


Magnetic sensor




Archive of events and messages

100 000

External power supply, V


Built-in battery

Li-SOCl2 C

Battery capacity, mAh


Ambient temperature, °C

-30 …+75°C

Weight, g


Dimensions, WxDxH mm


Ingress protection


Specifications :
Seller Smartico, LLC
Manufacturer Name Smartico
SKU 1689-11331-1
Manufacturer Part Number IS-NB
Product Attributes Metering, Modems, Bridges
Solution Represented Smart Agriculture, Smart Cities, Energy and Utilities, Smart Industries, Other, Smart Building, Smart Metering
Battery specification (Wh) 6500
Battery type Other
Antenna Integrated
Interfaces RS232, RS485, TTL, 4-20mA, Analog, Other, 0/10V
Other interfaces 1-WIRE, Line Control, Open Drain
Sim card size select if applicable Nano SIM (8.8 x 12.3mm)
Operating Temperature (min to max) -30 …+75°C
Depth (cm) 10.0
Width (cm) 10.0
Height (cm) 4.0
Technical datasheet

Industrial Sensor NB-IoT

Lead-time if backordered (in working days) 30-45
Lead-time if in stock (in working days) 3
Specific commercial conditions

Individual Pricing

Individual Conditions

Seller conditions Seller commercial condition
Seller shipping condition
Share your thoughts for: Smartico Industrial Sensor NB-IoT "IS-NB"
Write a customer review

No questions asked yet.

Vendor Questions/Answers:
Ask your question
Only registered users can ask questions. Please Sign in or create an account